Publish Time: 2022-06-24 Origin: Site
Store the PETG jar in a ventilated and dry environment at room temperature. It is not recommended to expose the PETG can to direct sunlight and heat. Do not tear off the protective film of the PETG jar before use, because daily dust and dirt will adhere to the surface of the board due to static electricity. The PETG jar protective film can also protect the circuit board from abrasion and scratches. So how should PETG jar be stored and handled? Let's take a look together below.
The following is a list of contents:
Store PETG jar naturally flat
Use after polishing the edge of the PETG jar
To avoid the warping of the PETG jar, the plate should be stored naturally and flat. For vertical storage, it is best to store the board at a small angle and place support underneath. Generally, the speed is fast. The coarse-tooth PETG jar saw blade is more suitable. The cutting speed of the circular saw is better at 4500rmp. However, to avoid melting of the plate, the speed should be adjusted as high as possible, and the plate should be fixed to reduce vibration and make the edge of the saw.
Other cutting methods for PETG cans include scrapers, hand saws, band saws, and other tools. The best PETG jar cutting method is to determine the cutting tool or method to improve work efficiency according to the actual situation.
After the PETG jar is sawed, the edges must be polished before use to avoid small cracks that may be left after sawing and cause the board to crack. The following methods can be used to polish the PETG jar.
PETG jar mechanical polishing
Polish the edges of the PETG jar with a mechanical polishing machine. The edges of the PETG can be as flat as possible. The sawed edges are too rough to be further mechanically polished. Gently press the PETG jar part and push it across the polished surface at a constant forward speed.
PETG jar flame polishing
After the PETG jar is sawed, trim the burrs, interface edges, milled edges, and/or polish with diamonds. For the best results of PETG tanks, please use a cooler flame (such as butane or propane) for polishing. The effect of PETG jar flame polishing is largely related to the skill, the more uniform the moving speed, the better the polishing effect. However, the flame treatment method can make the edges of the PETG can brittle.
PETG jar solvent polishing
Dichloromethane can be used, avoid overflow and pay attention to skill.
Founded in 2001, the company is currently the only domestic manufacturer specializing in the production of thick-walled PETG bottles and anodized aluminum-plastic bottle caps. It is an integrated supplier of plastic-aluminum packaging integrating R&D, production, and sales. The company focuses on customer needs and is committed to becoming an excellent company in the packaging industry. Continuously improve product technology management, quality management, and marketing service models; continue to carry out comprehensive excellent performance management activities, and strive to create service advantages in the thick-walled market segment. The above is about the storage and processing of PETG jar. If you are interested in the PETG jar, you can contact us. Our website is https://www.cheerypak.com/. I look forward to your coming and hope to cooperate with you.